Diesel Truck and Heavy Equipment Repair Glossary
The MetaFleet shop glossary defines the terms diesel truck and heavy-equipment repair shops use every day, from DOT inspection rules and PM levels to labor rates, parts pricing, repair orders and road calls. It's written in plain shop words for owners, service writers, techs and fleet maintenance managers. Federal rules are checked against the eCFR.
Numbers
Also called Three Cs, Complaint, cause, correction
The 3 Cs are complaint, cause and correction, the three parts of a clear repair line. The complaint is the problem as the driver or customer reported it, the cause is what the tech found, and the correction is what the tech did to fix it.
Repair orders and billing
49 CFR Part 396
Copy link to 49 CFR Part 396Also called Part 396
49 CFR Part 396 is the federal rule for inspecting, repairing and maintaining commercial motor vehicles. It covers maintenance records, DVIRs, roadside out-of-service repairs, the annual inspection and inspector qualifications. The duties sit with the motor carrier, and its agents who inspect or maintain its vehicles must follow it.
Read: 49 CFR Part 396 explained for repair shops
See also DVIR, DOT annual inspection, DOT record retention
DOT rules and inspections
A
After-hours rate
Copy link to After-hours rateAlso called Night rate, Weekend rate, Holiday rate
An after-hours rate is a higher labor rate for nights, weekends and holidays, set as its own rate or as a multiple of the standard rate. Write down which hours count and what happens when two apply, such as a Saturday night.
Read: Mobile diesel mechanic rates
See also Posted labor rate, Service call fee
Road calls and dispatch
Aftertreatment
Copy link to AftertreatmentAlso called Aftertreatment system, Emissions system
Aftertreatment is the emissions equipment in a diesel's exhaust after the engine. It can include a diesel oxidation catalyst (DOC), a DPF that traps soot and a selective catalytic reduction (SCR) catalyst that uses DEF to cut nitrogen oxides. Faults here can cut engine power (a derate).
Truck and equipment systems
Appendix A to Part 396
Copy link to Appendix A to Part 396Also called Appendix A, Minimum Periodic Inspection Standards, Appendix G
Appendix A to Part 396 is the federal list of defects that fail a vehicle at its DOT annual inspection. Its title is Minimum Periodic Inspection Standards, and it has 15 groups, from the brake system to the rear impact guard. Until October 14, 2021, it was Appendix G.
Read: DOT annual inspection checklist and who can do it
See also DOT annual inspection, Slack adjuster
DOT rules and inspections
AR aging
Copy link to AR agingAlso called Accounts receivable aging, Aging report, AR aging report
An AR aging report lists what each customer owes, grouped by how long each invoice has been open, often in 30-day columns out to 90 days and over. Shops check it weekly to chase the oldest balances first.
Repair orders and billing
B
Billed hours
Copy link to Billed hoursAlso called Sold hours
Billed hours are the labor hours that land on customer invoices. Paid hours are every hour a tech is on the clock, from payroll. The gap between the two is time the shop pays for and never bills, like waiting on parts, driving or diagnosis nobody charged for.
Read: Free Profit Leak Calculator (opens in a new tab)
See also Effective labor rate, Technician productivity, Flat rate
Labor and pricing
Book time
Copy link to Book timeAlso called Labor time, Book hours, Labor guide time
Book time is the number of hours a job should take according to a labor guide, a truck or engine maker's time standard, or the shop's own job history. A shop that bills flat rate charges book time however long the job really takes.
Labor and pricing
C
Card hold
Copy link to Card holdAlso called Pre-authorization, Card pre-auth, Authorization hold
A card hold is an authorization on a customer's card before the work starts, so the money is held but not charged. When the job is done, it's applied to the invoice. Shops use it for cash-on-delivery and one-off customers.
Repair orders and billing
Comeback
Copy link to ComebackAlso called Rework, Redo
A comeback is a repair that returns because the problem wasn't fixed or the fix didn't hold. The shop works the job twice and usually bills it once. That drags down technician efficiency and the effective labor rate.
Read: How repair shops cut downtime for fleet customers
See also Technician efficiency, Effective labor rate, 3 Cs
Labor and pricing
Commercial motor vehicle
Copy link to Commercial motor vehicleAlso called CMV
A commercial motor vehicle (CMV) is a vehicle used on a highway in interstate commerce that weighs or is rated at 10,001 pounds or more, is designed or used to carry more than 8 people for pay or more than 15 without pay (driver included), or hauls placarded hazmat.
Read: DOT inspection requirements, DVIRs and PM programs
See also GVWR, 49 CFR Part 396, Service truck
DOT rules and inspections
Core charge
Copy link to Core chargeAlso called Core deposit
A core charge is a refundable deposit on a part that can be rebuilt or recycled, such as a reman injector, a starter or a battery. The seller credits it back when you return the old unit, the core, on time and in the condition the seller requires.
Parts and inventory
Customer authorization
Copy link to Customer authorizationAlso called Repair approval, Customer approval
Customer authorization is the customer's OK to do the work on an estimate, best given in writing and saved with the job. Phone approvals are a common source of invoice disputes. Some fleets pre-approve work up to a set limit in their agreement.
Repair orders and billing
Cycle count
Copy link to Cycle countAlso called Cycle counting
A cycle count is a count of a few parts bins at a time, all year, instead of one big annual count that shuts the parts room. High-value and fast-moving parts are usually counted most often, and each miscount gets traced to its cause before the number is fixed.
Parts and inventory
D
Also called Diesel exhaust fluid
DEF is diesel exhaust fluid, a mix of urea and deionized water sprayed into the exhaust ahead of the SCR catalyst to turn nitrogen oxides into nitrogen and water. It has its own tank, and running low or using contaminated DEF can cut engine power.
See also Aftertreatment, DPF
Truck and equipment systems
Diagnostic fee
Copy link to Diagnostic feeAlso called Diag fee, Diagnostic time
A diagnostic fee is the charge for a tech's time finding what's wrong before the repair. Shops bill it as labor, on its own line of the estimate with the hours. Diagnosis given away free is skilled time the shop pays for and never bills.
See also Estimate, Fault code, Billed hours
Labor and pricing
Dispatch
Copy link to DispatchAlso called Dispatching
Dispatch is getting the right tech to the job. The dispatcher takes the call, picks the closest qualified tech with room in the day, sends the job details and tracks status until the work is done. A dispatch board shows every open job and who has it.
Road calls and dispatch
DOT annual inspection
Copy link to DOT annual inspectionAlso called Periodic inspection, Annual inspection, DOT annual
A DOT annual inspection is the periodic inspection every commercial motor vehicle must have passed within the past 12 months, checked against Appendix A by a qualified inspector. Each tractor, trailer and converter dolly needs its own, with the report or a decal on the vehicle as proof.
Read: DOT annual inspection checklist and who can do it
See also Appendix A to Part 396, Qualified inspector, DOT record retention
DOT rules and inspections
DOT record retention
Copy link to DOT record retentionAlso called Maintenance record retention, Inspection report retention
DOT record retention is how long Part 396 makes a motor carrier keep its paperwork. Maintenance records: 1 year, and for 6 months after the vehicle leaves the carrier's control. DVIRs and their certifications: 3 months. Annual inspection reports: 14 months. Roadside inspection reports: 12 months.
Read: DOT inspection requirements, DVIRs and PM programs
See also DVIR, DOT annual inspection, Roadside inspection
DOT rules and inspections
Downtime
Copy link to DowntimeAlso called Vehicle downtime
Downtime is the time a truck or machine can't work, from the breakdown until it's back on the job. It includes waiting for the tech, the parts and the approval as well as the repair itself. The opposite is uptime.
Read: How repair shops cut downtime for fleet customers
See also Road call, Fleet maintenance contract
Road calls and dispatch
Also called Diesel particulate filter
A DPF is the diesel particulate filter in the exhaust that traps soot. The soot is burned off during a regen. Ash left from engine oil doesn't burn, so the filter has to be cleaned or replaced on the maker's schedule or when it plugs.
See also Regen, Aftertreatment, DEF
Truck and equipment systems
Also called Driver vehicle inspection report
A DVIR is the report a driver writes at the end of each day's work on each vehicle driven. It lists any defect that would affect safe operation or cause a breakdown. If no defect is found or reported, no report is needed. It can be paper or electronic.
Read: DVIR rules and how to certify repairs
See also Repair certification, Pre-trip inspection, DOT record retention
DOT rules and inspections
E
Effective labor rate
Copy link to Effective labor rateAlso called ELR
Effective labor rate is the labor money a shop actually takes in for each hour it pays a tech to be there. Divide labor revenue, after discounts and write-offs, by paid tech hours. It falls below the posted rate when paid hours go unbilled or billed hours get discounted.
Read: Effective labor rate: what it is and how to figure yours
See also Posted labor rate, Billed hours, Technician efficiency
Labor and pricing
Engine hours
Copy link to Engine hoursAlso called Hour meter reading
Engine hours are the running time logged on an engine's hour meter. They set PM intervals for heavy equipment, reefer units and trucks that idle a lot or run a power take-off (PTO), because the engine wears while the odometer barely moves.
See also PM interval, Yellow iron, Reefer unit
Preventive maintenance
Estimate
Copy link to EstimateAlso called Quote, Repair estimate
An estimate is the written price for proposed work, broken out by labor, parts and fees, that the customer sees before the work starts. Extra work found during the repair goes on a revised estimate and gets its own approval.
See also Customer authorization, Repair order, Invoice
Repair orders and billing
F
Fault code
Copy link to Fault codeAlso called DTC, Diagnostic trouble code, Trouble code
A fault code is a code that a truck's engine control module (ECM) or another control module stores when it sees a problem. Active codes are happening now, and inactive or historic codes happened earlier. Techs read them with a scan tool or diagnostic software.
See also SPN and FMI, Aftertreatment, Diagnostic fee
Truck and equipment systems
Flat rate
Copy link to Flat rateAlso called Flat-rate billing, Flat-rate pay
Flat rate means billing a set number of hours for a job, usually book time, however long it really takes. A flat-rate tech is paid for the book hours on each job they finish, called flagged hours. Billing and paying the time on the clock instead is called actual hours.
Read: Flat rate vs actual hours in diesel repair
See also Book time, Billed hours, Technician efficiency
Labor and pricing
Fleet maintenance contract
Copy link to Fleet maintenance contractAlso called Fleet contract, Maintenance agreement
A fleet maintenance contract is a recurring agreement to keep a company's trucks or equipment running on a PM schedule at set pricing. Common setups are PM only, PM plus repairs up to an approval limit, and full service at a fixed price per unit.
Repair orders and billing
FMCSA
Copy link to FMCSAAlso called Federal Motor Carrier Safety Administration
FMCSA is the Federal Motor Carrier Safety Administration, the agency in the U.S. Department of Transportation that writes the safety rules for commercial trucks and buses. Its rules include Part 396 on inspection and maintenance, and its special agents can inspect a carrier's vehicles in operation.
See also 49 CFR Part 396, Roadside inspection
DOT rules and inspections
G
Glad hands
Copy link to Glad handsAlso called Gladhands, Air line couplers
Glad hands are the couplers that connect a tractor's air lines to a trailer. One carries supply air and is often marked red for emergency, and the other carries the service brake signal and is often marked blue. A worn or torn seal causes an air leak at the coupling.
See also Slack adjuster, Road call
Truck and equipment systems
Also called Gross vehicle weight rating
GVWR is the manufacturer's rated maximum loaded weight for a single vehicle. GCWR is the matching rating for a power unit and what it tows. A rating or actual weight of 10,001 pounds or more is one of the tests that can make a vehicle a CMV.
See also Commercial motor vehicle
DOT rules and inspections
I
Invoice
Copy link to InvoiceAlso called Repair invoice
An invoice is the bill for a finished job, listing labor, parts, fees and taxes with the payment terms and due date. Payment terms count from the invoice date, so an invoice sent a week late gets paid a week late.
Repair orders and billing
M
Mileage charge
Copy link to Mileage chargeAlso called Travel charge
A mileage charge covers the drive on a mobile call, billed per mile, as hourly travel time or as a flat price by distance zone. Say up front whether miles are round trip or one way, and use the same method on every call.
See also Service call fee, After-hours rate
Road calls and dispatch
N
Net 30
Copy link to Net 30Also called Net 30 terms
Net 30 means the customer owes the full invoice amount within 30 days of the invoice date. Shops offer it to fleet accounts that pass a credit check and sign written terms, with a credit limit on each account.
Repair orders and billing
O
OEM part
Copy link to OEM partAlso called OEM, Genuine part, Original equipment part
An OEM part, or genuine part, is made by or for the truck, engine or equipment maker and sold through its dealers. Aftermarket parts are made by other companies to fit the same units. Reman parts are rebuilt from returned cores by an industrial process.
See also Core charge, Parts markup
Parts and inventory
Oil analysis
Copy link to Oil analysisAlso called Oil sampling, Used oil analysis
Oil analysis is a lab test of a used oil sample for wear metals, contamination like coolant, fuel or dirt, and oil condition. Fleets use it to catch engine problems early and to confirm a drain interval fits their trucks. Stay within the engine maker's limits.
See also PM interval, PM A, B and C
Preventive maintenance
Out-of-service criteria
Copy link to Out-of-service criteriaAlso called OOS criteria, North American Standard Out-of-Service Criteria
The out-of-service criteria are the Commercial Vehicle Safety Alliance's North American Standard list of conditions that put a driver or vehicle out of service. A vehicle put out of service can't run until the repairs on the notice are done, though a crane or hoist tow is allowed.
See also Roadside inspection, Road call
DOT rules and inspections
P
Parts margin
Copy link to Parts marginAlso called Gross margin, Gross profit margin
Parts margin is the gross profit on a part divided by its selling price, shown as a percent. On the same sale it's always lower than the markup. Mixing the two up when setting prices means parts earn less than planned.
See also Parts markup, Parts matrix
Parts and inventory
Parts markup
Copy link to Parts markupAlso called Markup, Markup on cost
Parts markup is the gross profit on a part divided by its cost, shown as a percent. Shops add it to cost to set the selling price. Margin divides the same profit by the selling price, so on the same sale it's always the lower number.
Parts and inventory
Parts matrix
Copy link to Parts matrixAlso called Markup matrix, Pricing matrix, Sliding markup
A parts matrix is a pricing table that sets the markup by what a part costs. Cheap parts carry a higher markup and expensive ones a lower markup, because customers rarely check the price of a small part but do compare prices on big ones.
Parts and inventory
Also called Preventive maintenance, PM service
A PM is preventive maintenance done on a schedule to keep a truck or machine running and catch problems early. Repairs it turns up are usually quoted on their own. The DOT annual inspection is a separate federal check, though many fleets do both on one visit.
Read: Semi truck PM service: what's in PM A, B and C
See also PM A, B and C, PM interval, DOT annual inspection
Preventive maintenance
PM A, B and C
Copy link to PM A, B and CAlso called PM levels, PM A, PM B, PM C
PM A, B and C are levels of preventive maintenance, each including the one below it. PM A is often an oil and filter change with chassis grease and a safety check. PM B adds filters, fluid tests and deeper checks, and PM C adds longer-interval fluid changes and adjustments.
Read: Semi truck PM service: what's in PM A, B and C
See also PM, PM interval, Oil analysis
Preventive maintenance
PM interval
Copy link to PM intervalAlso called Service interval
A PM interval is how often a PM comes due, set by miles, engine hours or months, whichever comes first. Start from the engine, truck, transmission and axle makers' schedules, then adjust for how hard each truck works.
Read: Free DOT Inspection and PM Planner (opens in a new tab)
See also Engine hours, Oil analysis, PM
Preventive maintenance
Posted labor rate
Copy link to Posted labor rateAlso called Door rate, Shop rate
A posted labor rate is the hourly rate a shop sets for labor and shows on its estimates and rate sheet. Shops also call it the door rate. What the shop really collects per paid hour is its effective labor rate, which is usually lower.
See also Effective labor rate, After-hours rate
Labor and pricing
Pre-trip inspection
Copy link to Pre-trip inspectionAlso called Pre-trip, Driver inspection
A pre-trip inspection is the driver's check before driving. The driver must be satisfied that the brakes, steering, lights, tires, coupling devices and other listed parts work, review the last DVIR if one was required, and sign it to show the needed repairs were certified.
See also DVIR, Repair certification
DOT rules and inspections
Purchase order
Copy link to Purchase orderAlso called PO, PO number
A purchase order (PO) is a written order with a number both sides use to match the bill. Shops send POs to parts vendors, and many fleets issue a PO number that must be on the shop's invoice before they'll pay it.
Parts and inventory
Q
Qualified brake inspector
Copy link to Qualified brake inspectorAlso called Brake inspector
A qualified brake inspector is the person responsible for a motor carrier's brake inspections, service and repairs. They must be able to do the task, know the methods and tools, and have approved training, a state or provincial certificate, or at least 1 year of brake training or experience.
See also Qualified inspector, Slack adjuster
DOT rules and inspections
Qualified inspector
Copy link to Qualified inspectorA qualified inspector is a person allowed to perform DOT annual inspections. They must understand Part 393 and Appendix A, have mastered the methods and tools, and have a federal or state training program, a state or Canadian province certificate, or at least 1 year of training or experience.
DOT rules and inspections
R
Reefer unit
Copy link to Reefer unitAlso called Reefer, Transport refrigeration unit, TRU
A reefer unit is the refrigeration unit on a trailer or truck body that keeps a load cold or frozen. It usually has its own small diesel engine and hour meter, so it runs on its own PM schedule apart from the truck.
See also Engine hours, PM interval
Truck and equipment systems
Regen
Copy link to RegenAlso called Regeneration, DPF regen, Parked regen, Forced regen
A regen is a burn-off of the soot trapped in a DPF. A passive regen happens during normal driving and an active one is run by the engine computer. A parked regen is started by the driver, and a forced regen by a tech with a service tool.
See also DPF, Aftertreatment, Road call
Truck and equipment systems
Reorder point
Copy link to Reorder pointAlso called Min, Min/max, Minimum stock level
A reorder point, or min, is the stock level that tells you to order more of a part. A common formula is average daily use times lead time in days, plus safety stock. The max is the level you order back up to.
Parts and inventory
Repair certification
Copy link to Repair certificationAlso called Certifying a repair, DVIR sign-off
A repair certification is the signed statement on a DVIR that each listed defect has been repaired or that repair is unnecessary. The motor carrier or its agent, such as a repair shop working for the carrier, signs it before the vehicle runs again.
Read: DVIR rules and how to certify repairs
See also DVIR, Pre-trip inspection
DOT rules and inspections
Repair order
Copy link to Repair orderAlso called RO, Work order, Service order
A repair order (RO) is the document that tracks one job from start to finish: the customer, the unit, the complaint, the work done, the labor and the parts. Shops also call it a work order or service order, and it becomes the invoice when the job closes.
Repair orders and billing
Road call
Copy link to Road callAlso called Roadside repair, Roadside call, Breakdown call
A road call is a repair done where the truck or machine broke down, such as a shoulder, a truck stop or a job site, instead of in the shop. Phone triage before anyone rolls decides whether it can be fixed on site or needs a tow.
Read: Emergency diesel repair dispatch guide
See also Service call fee, Dispatch, Service truck
Road calls and dispatch
Roadside inspection
Copy link to Roadside inspectionAlso called Roadside DOT inspection
A roadside inspection is a check of a truck on the road by a federal or state inspector. Violations go on the report, and serious ones can put the vehicle out of service. Within 15 days the carrier certifies each violation was corrected and keeps a copy 12 months.
See also Out-of-service criteria, FMCSA
DOT rules and inspections
S
Service call fee
Copy link to Service call feeAlso called Trip charge, Call-out fee, Dispatch fee
A service call fee is the flat charge for sending a tech and truck out to the customer. Shops also call it a call-out fee or trip charge. Some fold a set number of miles into it, and others charge mileage on top.
Read: Mobile diesel mechanic rates
See also Mileage charge, After-hours rate, Road call
Road calls and dispatch
Service truck
Copy link to Service truckAlso called Mobile service truck, Field service truck
A service truck is a truck built to do repairs in the field, usually with a service body, a crane, an air compressor, a welder-generator, tools and a stock of common parts. For a mobile repair business, the service truck is the shop.
Read: Mobile service truck setup: equipment, layout and what to stock
See also Road call, Commercial motor vehicle
Road calls and dispatch
Shop supplies charge
Copy link to Shop supplies chargeAlso called Shop supplies, Shop supplies fee
A shop supplies charge is an invoice line for the small consumables a repair uses up, like rags, cleaner, sealant, grease and zip ties. Shops set it as a flat fee per repair order or a percent of labor with a cap. Some states limit it.
Read: Shop supplies charges and how to set yours
See also Invoice, Repair order
Labor and pricing
Slack adjuster
Copy link to Slack adjusterAlso called Brake adjuster
A slack adjuster is the lever between an air brake chamber's pushrod and the brake camshaft that takes up slack as linings wear. Air-braked commercial vehicles built on or after October 20, 1994 need automatic adjusters. Appendix A bars adjusting an automatic one by hand before fixing the cause.
Truck and equipment systems
SPN and FMI
Copy link to SPN and FMIAlso called Suspect parameter number, Failure mode identifier, J1939 fault code
SPN and FMI are the two main numbers in a J1939 fault code on a heavy truck. The SPN (suspect parameter number) says which part or reading has the problem. The FMI (failure mode identifier) says what kind of problem, such as high voltage or erratic data.
See also Fault code
Truck and equipment systems
T
Technician efficiency
Copy link to Technician efficiencyAlso called Tech efficiency
Technician efficiency is the hours billed for a tech's work divided by the hours the tech spent on those jobs, times 100. It can top 100 percent when a tech beats book time. Shops sometimes swap the names efficiency and productivity, so write down which formula you use.
Read: Technician efficiency vs productivity
See also Technician productivity, Billed hours, Book time
Labor and pricing
Technician productivity
Copy link to Technician productivityAlso called Tech productivity
Technician productivity is the hours a tech spent on jobs divided by the hours you paid them, times 100. It shows how much of the paid day went to customer work. Low productivity usually points to shop problems like waiting on parts, approvals or the next job.
Labor and pricing
V
Also called Vehicle Maintenance Reporting Standards, VMRS codes
VMRS is the Vehicle Maintenance Reporting Standards, a coding system for maintenance and repair work. The Technology & Maintenance Council of the American Trucking Associations keeps it. Codes run from whole systems down to single parts, plus codes for the work done, so fleets can compare repair costs.
See also Repair order, 3 Cs
Repair orders and billing
Y
Yellow iron
Copy link to Yellow ironAlso called Heavy equipment
Yellow iron is shop talk for heavy equipment like excavators, dozers, loaders and backhoes. The name comes from the yellow paint on many machines. Repairs often happen on the job site, and PM intervals usually run on engine hours instead of miles.
Read: MetaFleet for heavy equipment repair
See also Engine hours, Road call
Truck and equipment systems
Sources (checked November 19, 2026)
- ATA Technology & Maintenance Council, VMRS Overview
- eCFR, 49 CFR 385.4
- eCFR, 49 CFR 390.5T
- eCFR, 49 CFR 392.7
- eCFR, 49 CFR 393.53
- eCFR, 49 CFR 396.1
- eCFR, 49 CFR 396.3
- eCFR, 49 CFR 396.9
- eCFR, 49 CFR 396.11
- eCFR, 49 CFR 396.13
- eCFR, 49 CFR 396.17
- eCFR, 49 CFR 396.19
- eCFR, 49 CFR 396.21
- eCFR, 49 CFR 396.25
- eCFR, 49 CFR Chapter III (FMCSA)
- eCFR, 49 CFR Part 396
- eCFR, 49 CFR Part 396, Appendix A
- Federal Register, 86 FR 57060 (Oct 14, 2021), Appendix G redesignated as Appendix A to Part 396
Ready to see it on your own jobs?
See MetaFleet in Action
Book a demo and we'll walk through how your shop runs today, show you where MetaFleet fits, and build a simple rollout plan your team can follow.
Not ready to talk? Try a free shop tool
